Log and Timber Defense Colors

• Saffron 215 Saffron 215
• Buckskin 230 Buckskin 230
• Saddle Brown 235 Saddle Brown 235
• Slate 242 Slate 242
• Mesquite 250 Mesquite 250
• Silver Mist 262 Silver Mist 262
• Smoky Sky 263 Smoky Sky 263
• Sable 265 Sable 265
• Russet 266 Russet 266
• Cimarron 274 Cimarron 274
•  

Log and Timber Defense is designed to be applied to bare wood in one or two coats. If it is applied to wood that already has an existing coating, this can prevent it from forming the lattice network inside the wood. We have had some customers ask: “Can I apply a topcoat such as Lifeline Advance™ to Log and Timber Defense?” We do not recommend application of a topcoat. The reason we do not recommend this is because when a maintenance coat of Log and Timber Defense is needed in the future, there will be difficulty with penetration into the wood because the topcoat forms a barrier to penetration. This could leave undesirable surface defects as well as an uneven appearance. Furthermore, it could lead to peeling and flaking of the film.

How Does Log and Timber Defense Look?

Texture is another property that distinguishes Log and Timber Defense from our Lifeline Stains. Due to its penetrating nature, Log and Timber Defense leaves the surface with a more natural, rustic beauty. It will appear much flatter in appearance. However, if a slightly different look is desired, a second coat of Log and Timber Defense may be applied, but the appearance will remain relatively flat. The second coat will increase color intensity and provide an increased level of overall protection for the system.

Difference Between Stain and Sealant vs. Film-Forming Finishes

In contrast, our traditional Lifeline stains are actual breathable film-formers. This is to say they form a film directly on the surface of the wood, but do not penetrate deeply into the wood. When applied correctly our Lifeline stains are not likely to peel due superior breathability and excellent adhesion. They are, however, only slightly more likely than Log and Timber Defense to peel due to their film forming nature. In addition, our Lifeline Stains are designed to be applied over our existing topcoat with no problems with adhesion, color development or film defects. The Lifeline stains will provide a much higher level of gloss development than Log and Timber Defense due to the films being primarily on the surface of the wood, with the added benefit of being able to apply Advance gloss topcoat to finish the system. 

Which One Should I Choose?

It can be difficult to choose between our finish options. Rest assured, all our options are high quality and engineered to last. Both our Lifeline Stains and Log and Timber Defense are formulated with ingredients that inhibit the growth of mold and mildew. Log and Timber Defense is both a stain and sealant in one package. It helps to keep liquid water out, which reduces biological growth that can attack and destroy your wood. In contrast, traditional natural oils such as Linseed Oil can easily promote growth of mold and mildew. Finally, both Log & Timber Defense and Lifeline Stains are both waterborne, low in odor, have easy soap and water cleanup, and are non-flammable. Each of our stains and finishes offer unique properties designed to give your home the very best protection possible.

For more information about our finishes please visit www.permachink.com and click Wood Finishes.