pinterest-icon YouTube Facebook Twitter Instagram



Blaster-Buddy

Blaster-Buddy

Finish Removal System

The Blaster-Buddy finish removing system is the easiest and safest method of removing old finishes from your log home. Your home will be clean, dry and ready to apply beautiful new coats of LifeLine stains and finishes.

The Blaster-Buddy system weighs approximately 450 pounds and is about four feet high. It comes with 50 feet of hose, a remote control unit, an instruction manual.  When rented it comes with a safety kit that includes gloves, earplugs, dust masks and a face shield with headgear.

  • Environmentally Friendly
  • Dry Method - No Water Used
  • Product Guide
$6652.99
Call to Order 1-800-548-3554
blaster buddy
back to top

Restoration FAQ

If your log home has an unknown finish, it's best to take it down to bare wood. If you know that it's been finished with Perma-Chink Systems products, you can clean and reapply finish or topcoat. For the best products to use, read this.

Restoration Reviews

Our contractor used the Strip-It product on the log home that we recently purchased. He used an airless sprayer and then pressure washed the home. It did a great job of removing the dark paint on it. Soon, we will be applying your Ultra-2 stain and Advance topcoat. We couldn't be more pleased with how our project is going so far, so thank you Perma-Chink!
Myra
We received your samples of S-100 and Strip-It to try on our logs. Strip-It worked the best as our finish remover. We were able to leave it on overnight and we used a pressure washer to remove the old finish the next day. Now we are continuing the restoration process and are planning on using more products from Perma-Chink Systems.
Roosevelt
I found this product to be fairly easy to work with. Our home had a couple of places where animals had chewed on the logs in the past, so we wanted to fill in those areas. We cleaned those areas up, then applied a little M-Balm, and then put the E-Wood right on top of it. We had to sand it down a little, but it does look pretty good so far. We are going to stain over it soon.
Cecily
As a log home restoration company, E-Wood is used in many applications for restoration. We use it on broken or cracked wood, and fill in where knots have fallen out of pine boards. It is easy to use: Mix equal parts with your hands (use gloves), shape and apply to affected area. Let dry, sand and stain. It does not shrink or pull away. It is a good product: Thank you, Perma-Chink!
Stuart

Restoration News

About M-Balm & E-Wood Epoxies

Media Blasting Versus Chemical Stripping

About Pressure Washing

How to Repair Large Voids in Logs